 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SENSITRON SEMICONDUCTOR Technical Data Data Sheet 4855, Rev.- MURC405-MURC460 MURC405-MURC460 Ultrafast Silicon Die Applications: * Switching Power Supply * General Purpose * Free-Wheeling Diodes * Polarity Protection Diode Features: * * * * * * Glass-Passivated Epitaxial Construction. Low Reverse Leakage Current High Surge Current Capability Low Forward Voltage Drop Fast Reverse-Recovery Behavior Symbol VRRM VRWM VR IF(AV) IFSM MURC 405 50 MURC 410 100 MURC 415 150 MURC 420 200 MURC 440 400 MURC 460 600 Unit V A A Maximum Ratings: Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current(Square Wave) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, half wave, single phase, 60Hz) Max. Junction Capacitance @VR = 5V, TC = 25 C, fSIG = 1MHz, VSIG = 50mV (p-p) Operating JunctionTemperature and Storage Temperature 4.0 @ TA = 80C 125 4.0 @ TA = 40C 110 CT TJ, Tstg 100 -65 to +175 40 pF C Electrical Characteristics: Characteristics Max. Instantaneous Forward Voltage (Note1) (IF = 3.0 Amp, TJ = 150 C) (IF = 3.0 Amp, TJ = 25 C) (IF = 4.0 Amp, TJ = 25 C) Max. Instantaneous Reverse Current (Note1) (Rated DC Voltage, TJ = 150 C) (Rated DC Voltage, TJ = 25 C) Max. Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 A/s) (IF = 0.5 Amp, IR = 1.0 A, IREC=0.25A) Max. Forward Recovery Time (IF = 1.0 Amp, di/dt = 100 A/s, Recover to 1.0 V) 1. Symbol VF MURC 405 MURC 410 MURC 415 MURC 420 MURC 440 MURC 460 Unit V 0.71 0.88 0.89 150 5 35 25 25 1.05 1.25 1.28 250 10 75 50 50 A nS IR trr Tfr nS Pulse Test: Pulse Width = 300s, Duty Cycle 2% * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR Data Sheet 4855, Rev.- MURC405-MURC460 Dimensions in inches (mm) Top side metalization: Al - 25 kA minimum or Ti/Ni/Ag - 30 kA minimum ANODE BA Bottom side metalization: Ti/Ni/Ag - 30 kA minimum. Bottom side is cathode, top side is anode. Anode C Cathode Die type (1) Area (mil2) Si p-n die 65 x 65 Tolerance is 0.003" (0.076 mm) (2) Tolerance is 0.001" (0.025 mm) Dimension A (1) Inch (millimeter) 0.065 (1.651) Dimension B (1) Inch (millimeter) 0.049 (1.254) Dimension C (2) Inch (millimeter) 0.009 (0.229) DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR Data Sheet 4855, Rev.- MURC405-MURC460 MURC405, MURC410, MURC415, MURC420 * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR Data Sheet 4855, Rev.- MURC405-MURC460 MURC440, MURC460 * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * |
Price & Availability of MURC410
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |